Heating Ventilation & Air Conditioner (HVAC) systems are widely used across Georgia to keep the surroundings comfortable. While HVAC unit is an extremely important part of the home, its maintenance is equally important. Hence, people are always looking for Air Duct Repair and Replacement in Cumming

Hiring a professional for Air Duct Cleaning in Cumming can be an expensive task. On the contrary, if you learn to clean the ductwork yourself, you can save a great deal of money. 

WHY REGULARLY CLEANING THE DUCTS IS IMPORTANT?

Filthy and contaminated ducts can be a source of health issues, allergies, or bad odors. While regularly cleaning the ducts can help maintain dust-free, fresh, and high air quality. Apart from this, cleaned ducts enhance the lifespan of the systems and demand less repair and maintenance. This helps you save a lot.  

HOW OFTEN DUCTWORK NEEDS TO BE CLEANED?

Experts from NADCA recommend cleaning the air ducts twice a year. And if there are pets or house members who are prone to allergies or respiratory issues, then cleaning is recommended every season.  

CLEANING DUCTS

Luckily, cleaning the duct is not a very complicated task if the right methods and tools are used. For the novice cleaners, it may take just five minutes to clean the air registers for the first time.  

DIY DUCT CLEANING METHODS

Things Required: 

  1. Vacuum Cleaner Attached to A Duct Brush
  2. Microfiber Cleaning Cloths
  3. Screwdriver
  4. Manual Dryer Vent Brush
  5. Flexible Vacuum Hose Extender
  6. Stool or Ladder 
  7. Liquid Soap
  8. Water 
  9. All-Purpose Cleaning Spray

Directions:

Step 1: Pre-cleaning Steps 

The first and foremost step before cleaning the ductwork of the HVAC system is to switch it off. If you have the ducts or registers on the higher side of the wall or ceiling then a ladder or stool will be required. 

Step 2: Uncover the Vents 

Next, you need to uncover the registers. This can be done by using a screwdriver that can be used to remove the wall and ceiling vents or air registers. 

Step 3: Cleaning the Vents

After uncovering the vents, you need to wash the lid using soap and hot water. If the lid is too dirty, you may use a scrub to clean it (be careful not to damage it). The unpainted metal registers can be washed in a dishwasher but painted or varnished ones can lose their color if cleaned this way. Wipe and dry the components before fixing them back. 

Step 4: Clean the Ducts Using the Vacuum 

While the vent covers are getting dried, you can clean the ducts. For this, you need to use a dryer vent brush and insert it in the ductwork to clear it. The most recommended method is to gently rotate the brush along the duct walls. Be careful, not damaging, or dislodging the system. 

Next, you need to attach the flexible hose to the vacuum cleaner, insert it into the ductwork, and effectively remove the debris. In case your system has flexible ducts, then a gentle approach is recommended and the floor of the vent is the most important part. After this, you need to remove the hose and switch off the vacuum cleaner. 

Step 5: Wipe Clean the Inside of the HVAC Unit 

The next important step is to access the inside of the ductwork and clean it using a damp microfiber. Repeat the process unless the interior side is completely clean. For stubborn dirt particles, you may use an all-purpose cleaner spray on the microfiber cloth before cleaning. 

While cleaning the cold air returns, you must know that these sections are usually unlined. So, it is recommended not to saturate this area while wiping it with a wet cloth, or mold growth may appear. So, you must rinse your microfiber cloth often and wring it out well while you clean. 

Step 6: Clear HVAC Blower Section 

When the system is turned off, you may safely access the return air boot and the blower section by removing the panels located on the front side of the furnace. You must know that a major part of the dust and debris accumulates in the furnace eventually leading to blockages. A vacuum cleaner can be used to eliminate dust, dirt, and debris from the blower. You must take extra care while cleaning the furnace fan as it gets easily damaged. 

Step 7: Replacing Furnace Filter 

Accumulation of dust and blocked ducts eventually damage the HVAC furnace filter. A faulty filter will not only hinder proper airflow but also reduce the lifespan of the system. So, every time you clean the ductworks, you must consider replacing the furnace filter. 

Step 6: Finishing the Cleaning Task 

After you are finished with cleaning the ducts, blower, and replacing the furnace filter, you should fix back the vent cover (using the screwdriver), clean up the surrounding area and safely keep back all the cleaning equipment. 

CONCLUSION 

Although cleaning HVAC ductwork is a professional’s task but it can be effectively performed yourself if proper method and equipment are used. People usually call a professional service for such tasks to avoid the hassle and mess involved in self-cleaning the ducts. But, hiring professional cleaning services every season may be an expensive task. 

After the HVAC parts are properly cleaned using the above-mentioned steps, you may use a vacuum cleaner to clear your home and dust off your furniture and fixtures. Also, the wipes and cloths used in cleaning the system can be washed with soap water and reused for cleaning purposes. 

On the contrary, if you feel that there is trouble cleaning the ducts, then the best solution is to call a reliable HVAC cleaning service in your town and get the job done. 

Read Also : 6 Importance Points of Roof Restoration

Leave a Reply

Your email address will not be published. Required fields are marked *

11 − 1 =